TREADMILL SPEED SENSOR KIT UNIVERSAL ROUND TYPE
These sensors are used on many treadmills and exercise equipment and if they fail will usually display an ERROR 1 CODE. This can also be due to it being mis-aligned sensor or the signal wires cut or magnet missing from the pulley loose connections etc or a faulty motor control board. Please check these before ordering a kit or contact me for advice.
- 1 sensor
- 2 quick fit screw connectors no soldering needed !!!! just strip the wires back and join with the connectors see pictures
- 1 prolong the life of your treadmill booklet
- Size 27mm long x 6mm wide
Fitting Instructions for treadmills
REMOVE the mains Plug from the Mains Wall Socket – TREADMILL OFF! Then remove the faulty or damaged Sensor and cut the wires a few cm away from the Sensor. Align the new Sensor onto the machine and join the wires of the new Sensor to the wires of the original wiring using the Quick fit Screw-on connectors provided ,the sensor should be no more than 4mm away from the magnet in the pulley see pictures also use tie clips to fix the wires away from any moving parts
I DO NOT LEND PARTS OUT !!!!!
IF THE ITEM BECOMES FAULTY PLEASE SEND IT BACK IT WILL BE TESTED AND A REPLACEMENT WILL BE SENT OUT IF PROVEN FAULTY
PLEASE EMAIL ME OR RING ME IF YOU NEED ADVICE Also Treadmill motor control boards tested repaired reconditioned
TEL 07900 467675 8 in the morning till 9 at night 7 days